CIM-801 Plastic Limit Set - IS:2720 (Part-VII), ASTM-D-427, BS:1377, AASHO-190

CIM-802 Shrinkage Limit Set - IS:2720 (Part-VII), ASTM-D-427, BS:1377, AASHO-92

CIM-803 Cone Penetrometer - IS:2720 (Part-V)

CIM-804 High Speed Stirrer - IS:2720 (Part-IV)

CIM-808 Grain Size Analysis (Pipette Method) - IS:2720 (Part-IV), BS:1377

CIM-809 Plummet Balance

CIM-810 Marsh Cone for Bentonite & Concrete Slurry

CIM-811 Soil Hydrometer - IS:2720 (Part-IV), IS:3104

CIM-812 Mud Balance

CIM-813 Sand Pouring Cylinder - IS:2720 (Part-XXVIII)-1966

• Small size with 10cm central hole tray
• Medium size with 15cm central hole tray
• Large size with 20cm central hole tray

CIM-815 Core Cutter - IS:2720 (Part-XXIX)-1966

CIM-816 Harvard Miniature Compactor

CIM-817 Miniature Field Permeameter

CIM-819 Heavy Compaction Test - IS:2720 (Part-VIII)

CIM-820 Universal Automatic Compactor - IS:2720 (Part-VII & VIII)

CIM-821 Miniature Compaction Apparatus (Abbott Type) - IS:2720 (Part-IX) 1971-1978

CIM-822 Relative Density Set - IS:2720 (Part-XIV)

CIM-823 Moisture Tins

CIM-824 Pocket Penetrometer for Soil

CIM-825 Pycnometer Jars

CIM-827 Vicksberg Penetrometer (Proving Ring Penetrometer) with Optical Viewer

CIM-828 Proctor Needles - ASTM-D-1558

• Spring Type
• Hydraulic Type

CIM-830 North Dakota Cone - IS:2720 (Part-XXXII)

CIM-831 Rapid Moisture Meters (0-25% or 0-50%) - IS:2720 (Part-II), IS:12175

Infrared Moisture Meters - IS:2720 (Part-II)

CIM-836 Consolidation Apparatus - IS:2720 (Part-XV), BS:1377, ASTM-D-2435

• Floating Ring Type Model
• Single Gang Model
• Three Gang Model
• Six Gang Mode

CIM-839 Direct Shear Apparatus (Hand Operated / Motorised) - IS:2720 (Part-XIII), ASTM-D-3080

• Single Speed
• Six Speeds
• Twelve Speeds
• Thirty Speeds

CIM-844 Sampling Augers available in various sizes.

• Posthole Type
• Screw Type

CIM-846 Sampling Tubes (Relieved/Unrelieved)

CIM-848 Sampling Outfit (Heavy Duty)

CIM-849 Sampling Outfit for Unconfined Compression & Triaxial Strength Samples

CIM-850 Extractor Frames (Hand Operated) Hydraulic/Screw Type for various Triaxial, CBR, Unconfined Test samples

CIM-853 Piston Sampler

CIM-834 Permeability Apparatus - IS:2720 (Part-XBII)-1966

CIM-835 Universal or Combination Permeameter

CIM-859 Unconfined Compression Test Apparatus (Spring Type Autographic) - IS:2720 (Part-X), ASTM-D-2166, AASHO-T208, BS:1377

CIM-860 Unconfined Compression Tester (Proving Ring Type), Hand Operated/Morotised - IS:2720 (Part-X), AASHO-T208

CIM-866 Universal Triaxial Cell (Stationary Bushing)

CIM-868 Triaxial Shear Test Apparatus (Hand Operated/Motorised) in various Speeds

CIM-873 "Bishop" Pore Pressure Apparatus

CIM-856 Soil Trimmer (Hand Operated/Motorised)

CIM-858 Soil Lathe (Motorised) Bench Mounting

Constant Pressure System, Mercury type, for Triaxial Test.

CIM-883 Dead Weight Type Oil Water Constant Pressure System

CIM-884 Lateral Pressure Assembly

CIM-875 Volume Change Gauges

CIM-886 California Bearing Ratio Apparatus (Hand Operated/Motorised) - IS:2720 (Part-XVI)

CIM-889 Swell Test Apparatus

CIM-890 IOWA Bearing Value Apparatus (Hand Operated/Motorised)

CIM-894 Load Frames in various capacities from 500 kgf to 10000 kgf

Motorised Load Frames with various Speeds

CIM-899 Split Spoon Sampler (with/without Liner) - IS:2131-1963, IS:9640-1980

CIM-901 Tripod

CIM-902 Portable Aluminium Derrick

CIM-903 Tripod Pulley

CIM-904 Static Cone Penetrometer (Hand Operated/Engine Driven) - IS:4968 (Part-III)

CIM-906 Laboratory Vane Shear Apparatus - IS:2720 (Part-XXX)-1968

Hand Operated Model
Motorised

CIM-909 In-Situ Vane Shear Test - IS:4434-1967

CIM-910 Brass Frame Sieves in 20 cm. & 30cm dia. sizes from 4.75mm to 25 microns - IS:460 (Part-I)-1985, ASTM-E-11-70, BS:410-1969,

CIM-917 Sieve Shakers

CIM-914 Hand Operated for 20cm & 30cm dia. Sieves
CIM-917 Gyratory Type for 20cm, 30cm & 45cm dia. Sieves
Rotap Type for 20cm dia. Sieves
Wet Sieve Shakers

CIM-920 Plate Bering Test set up with different types & sizes of bearing plates - IS:1888-1962

CIM-921 Load Trusses

• 20 Tonne capacity
• 30 Tonne capacity
• 50 Tonne capacit

CIM-924 Proving Rings with Works Certificate or Certificate from a Testing Laboratory

• Compression Type, capacity form 25kgf to 200,000kgf
• Tension Compression Type, capacity form 50kgf to 10,000kgf