CIM-501 Cement Sampler, Brass/Steel - IS:7535-1986

CIM-502 Blaine's Air Permeability Apparatus - IS:4031, IS:5516, IS:1727, IS:4828, ASTM-C-204, BS:4359 (Part-II)

CIM-503 Lea And Nurse Air Permeability Apparatus - IS:5536, IS:8425, BS:12, BS:1370, BS:146, BS:915

CIM-504 Air Permeability Apparatus (Rigden Type) - IS:8425, BS:4352 (Part-II), BS:12, BS:146, BS:915, BS:1370, BS:4027, BS:4246, BS:4248

CIM-505 Vicat Needle Apparatus - IS:4031, IS:2645, IS:2542 (Part-I), IS:1727, IS:5513, IS:712, BS:12, BS:146, BS:915, BS:1370, BS:4027, BS:4246, BS:4248, AASHO-T129, E131

CIM-506 Vicat Needle Apparatus With Dashpot

CIM-507 Le-Chatelier Mould - IS:269, IS:712, IS:5514, IS:1727, IS:2645, IS:4031, IS:6932 (Part-IX), BS:890, BS:915, BS:1370, BS:4027, BS:4226, BS:4248

CIM-508 Ring Mould - IS:712-1956

CIM-509 Le-Chatelier Flask - IS:4031-1968

CIM-510 Gillmore Needle Apparatus - ASTM-C-191

CIM-511 Kelley Ball Penetration Apparatus - ASTM-C-360

CIM-512 Southard Viscometer - IS:6932 (Part-VI)

CIM-513 Vee Bee Consistometer - IS:1199

CIM-514 Slump Test Apparatus - IS:7320

CIM-515 Air Entrainment Meter Various Capacities Available - IS:1199-1959

CIM-519 Compaction Factor Apparatus - IS:1199, IS:5515

CIM-520 Flow Table - IS:6932 (Part-VIII)

CIM-521 Flow Table - IS:1199-1959, ASTM-C-124, AASHO-T120

CIM-522 Flow Table (Motorised) - IS:1199, ASTM-C-124, AASHO-T120

CIM-523 Flow Table - IS:5512

CIM-524 Flow Table (Motorised) - IS:5512

Flow Table For Concrete Of High Workability - IS:9103-1999, BS:1881 (Part-105), Din-1048, En-12350 (Part-5)

CIM-525 Mortar Mixer - IS:4031, IS:1727, IS:10890

CIM-526 Laboratory Concrete Mixer (Hand Operated /Motorised)

CIM-528 Laboratory Cement Autoclave With Stainless Steel Chamber 21kg/Cm.Sq. Pressure - IS:4031-1968, IS:1624-1960

CIM-529 Shrinkage Bar Mould - IS:4031, IS:10086, ASTM-C-227

• Single Gang
• Two Gang
• Three Gang
• Four Gang

CIM-533 Standard Spatula - IS:4031, IS:269, BS:12

CIM-534 Gauging Trowel - BS:12, IS:4031

CIM-535 Trowel - ASTM-C-190, IS:4031

CIM-536 Demountable Mechanical Strain Gauge

CIM-537 Lateral Extensometer

CIM-538 Longitudinal Compressometer

CIM-539 Length Comparator - IS:1199-1959, IS:4031-1968

CIM-540 Volume Change Apparatus - ASTM-C-490, IS:4031, BS:1881

CIM-541 Sand Absorption Cone And Tamper - ASTM-C-128, AASHO-T84

CIM-542 Jolting Apparatus - IS:1727-1967, IS:4031-1968, ASTM-C-349-64

CIM-543 Flexure Testing Machine (Motorised) Rilem-Cembureau Test - IS:1727, IS:4031-1968, ASTM-C-109

CIM-544 Tamping Rod - IS:516, ASTM-C-29, C-31, C-39, C-57, C-138, C-192, AASHO-T29, T-23

CIM-545 Tamping Bar - IS:516

CIM-546 Moulds - IS:4031, IS;516, IS:10082, IS:10086

Cube Moulds

• C.I. Size 50mm Cube
• Steel/C.I. Size 7.06 Cube
• C.I. Size 10cm Cube
• C.I. Size 15cm Cube
• C.I. Size 20cm Cube
• C.I. Size 30cm Cube

Cylindrical Moulds

• C.I. Size 15cm x 30cm
• C.I. Size 10cm x 20cm
• C.I. Size 30cm x 60cm

  Beam Moulds

• C.I. Size 10cm x 10cm x 50cm
• C.I. Size 15cm x 15cm x 70cm
• C.I. Size 15cm x 15cm x 75cm
• C.I. Size 4cm x 4cm x 16cm

CIM-587 Capping Set (Horizontal) - IS:516-1959, BS:1881, ASTM-C-31, C-617

CIM-588 Capping Set (Vertical) - IS:516-1959

CIM-591 Vibrating Machine (Mould Vibrator/Mortar Cube Vibrator) - IS:4031-1968, IS:1344-1959, BS:12

CIM-601 Hydraulic Jacks & Pumping Units in Various Capacities & Configurations

CIM-620 Compression Testing Machines - IS:516, IS:14856

• Capacities 250 Kn
• Capacities 500 Kn
• Capacities 1000 Kn
• Capacities 1500 Kn
• Capacities 2000 Kn
• Capacities 3000 Kn

• Portable Models Upto 1500 Kn
• Electrical Models All Capacities In Two Pillar Type Load Frame Or Four Pillar Type Load Frame
• Compression Testing Machines Available In "Analogue" (Pressure Gauge) Readout OR "Digital" Readout
• Compression Testing Machine With Flexure Test Attachment In "Analogue" Model OR "Digital" Models Available

Digital 4 pillar type Compression testing machine.

CIM-631 Concrete Test Hammer (Small/Big)

Vibrating Hammer Compactor For DLC Compaction

CIM-614 Tensile Strength Tester (Hand Operated/ Electrically Operated) - IS:269-1950, BS:12

CIM-616 Tensile Strength Tester - ASTM-C-190

CIM-633 Permeability Apparatus - IS:3085

• Single Cell Model
• Three Cell Model

CIM-639 Pozzolana Cement Mortar Permeability Apparatus - IS:1727-2645

• Three Cell Model
• Six Cell Model
• Twelve Cell Model

CIM-642 Flexure Testing Machine (Hand Operated/ Electrically Operated) - IS:516, BS:1881, ASTM-C-78

CIM-644 Tile Flexure Testing Machine - IS:654, IS:1237, IS:1706

CIM-645 Tile Abrasion Testing Machine - IS:1237, IS:1706

CIM-611 Mortar Penetrometer- ASTM-C-403

CIM-612 Cone Penetrometer For Mortar - IS:2250-1965

CIM-613 Pocket Concrete Penetrometer - ASTM-C-403

Penetrometer For Checking Setting Time Of Concrete IS:8142-1976

Half Cell Potentiometer For Checking Corrosion Of Reinforcement